Demand Peripherals
Robotics and Automation Made Easy

Home » Development » New Product Ideas » Output Port Expander (Utility card to convert one slot into 8 quad output ports)
Output Port Expander [message #9] Mon, 13 April 2020 20:52
BobSmith is currently offline  BobSmith
Messages: 10
Registered: April 2020
Junior Member
Use the Out32 peripheral to control eight output cards.
Several DPI cards use the four pins from the FPGA for simple on/off control. The quad relay card is a good example. The purpose of this utility card is to use one slot on the FPGA to control up to eight on/off control cards.
The utility card would appear as an Out32 peripheral and could use the Out32 host driver.

An early prototype for this card is available here:
https://demandperipherals.com/images/se8_outline.png
https://demandperipherals.com/images/se8.svg

Previous Topic: Gantry distance sensor`
Next Topic: Grove interface for the I2C card
Goto Forum:
  


Current Time: Thu Jun 20 21:36:48 UTC 2024

Total time taken to generate the page: 0.01576 seconds