Demand Peripherals
Robotics and Automation Made Easy

Home » Development » New Product Ideas » Waveform generator (AD9833 based waveform generator)
Waveform generator [message #6] Sun, 12 April 2020 01:25
BobSmith is currently offline  BobSmith
Messages: 10
Registered: April 2020
Junior Member
Build a computer controlled waveform generator.
The AD9833 is a good choice for this design. An ESPI peripheral should work and might not need any modification. The host driver should be fairly simple. The simplicity of the circuit and the relatively low frequencies involved should make PCB layout not too difficult.

A similar design is available from MikroElektronika:
https://www.digikey.com/product-detail/en/mikroelektronika/M IKROE-3309/1471-2144-ND/9953078
Previous Topic: Weather sensor card
Next Topic: Analog CPLD
Goto Forum:
  


Current Time: Thu Mar 28 15:55:11 UTC 2024

Total time taken to generate the page: 0.01803 seconds