Demand Peripherals: New Product Ideas

Home » Development » New Product Ideas » IMU Card (SPI based IMU card)

Show: Today's Messages :: Polls :: Message Navigator
E-mail to friend

IMU Card [message #3]

Sat, 11 April 2020 01:39

BobSmith
Messages: 10
Registered: April 2020

Junior Member

Build an SPI based IMU card. A simple choice for this might be the BNO055. The Verilog for this peripheral should poll the chip at specified times and repackage the data into a single packet from the FPGA to the host. The host driver software should convert the data to text for display or further processing.

Configuration at the host should allow specifying the sample interval as well as the sensors sensitivities. This means the FPGA peripheral should have a 'pass through' mode to let the host set parameters at initialization time, and then switch to a 'poll' mode to collect the sensor data.

Report message to a moderator

[Message index]

IMU Card

By: BobSmith on Sat, 11 April 2020 01:39

Previous Topic:	RFID Reader
Next Topic:	Dual voltage/current motor controller

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sat Aug 09 23:32:42 UTC 2025

Total time taken to generate the page: 0.01679 seconds